Dry Cleaning And Washing Cylinder - Qinsun
Tillverkare av professionella provningsinstrument
Nationell hotline för samråd:+86 021-64208466

Kemtvätt- och tvättcylinder

Dry Cleaning And Washing CylinderTesting Standards:AATCC 162, 16 CFR Part 1610Applications:Dry Clean

WhatsApp : +86 13816217984

Email : info@qinsun-lab.com

Innehåll
Kemtvätt- och tvättcylinder

Provningsstandarder:
AATCC 162, 16 CFR Part 1610

Ansökningar:
Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water. It also can be used to prepare samples for flammability testing.

Produktinformation:
Dry cleaning and washing cylinders are also known as dry cleaning tester and AATCC 162 tester. Dry cleaning and washing cylinder is used to test the color fastness of fabric to dry-cleaning and chlorine water washing. The Dry Cleaning And Washing Cylinder is comprised of stainless steel rotating test chamber with capacity of 7650ml, support frame, variable speed drive with digital timer.

Parameters:
1.Equipped with stainless steel rotating roller;
2.Height of tank: 330mm;
3.Diameter of in-tank: 220mm;
4.Rotating speed can be adjusted according to customer's requirements;
5.Overall dimension: 720×490×620mm(L×W×H);
6.Equipped with digital timer and displays;
7.Weight: 98kg.

Operation
Clean the dry cleaning cylinder
Prepare the hardness concentrates according to the relevant standards.
51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized    water.
If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
Get out the sample and remove the excess solution.
 

Tekniska parametrar
ObjektParametrar
Dimension72L X 49W X 62H (cm)
StructureRostfritt stål
YtbehandlingWiredrawing treatment
Transport weight80kg
Strömförsörjning220V  50HZ  max.0.05A
 

Notes
1. For dry cleaning test, the instrument should be placed in the fume hood (using toxic solvent of tetrachloroethylene).
2. The operators need to wear gas masks and protective gloves.
3. Carefully handling with the liquid recycling, sending to the waste liquid recycling station for suggestion.

Produktvisning
 
 

Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.


Nätmeddelande

Kontaktuppgifter

Företagstelefon

+86-21-6420 0566

Arbetstider

måndag till fredag

Mobiltelefon:

13816217984

E-post:

info@qinsun-lab.com

QR-kod