DescriptionThe STD-TE 65 Multiplex Sand/Wheel Abrasion Tester is designed to perform tests accordin
WhatsApp: +86 13816217984
E-postadress:info@qinsun-lab.com
The STD-TE 65 Multiplex Sand/Wheel Abrasion Tester is designed to perform tests according to the conditions described in the following methods:
ASTM G65 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM G105 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM B611 Test Method for Abrasive Wear Resistance of Cemented Carbides
The machine is floor standing with test assemblies mounted on a back-plate and abradant discharged downwards into a collecting hopper. Load is applied by pneumatic cylinder in conjunction with a manually adjusted precision regulator, with a pressure sensor for load measurement.
Speed set-point control is manual, implemented via a PLC, with input via touch-screen.
| ASTM Conditions | |
| Wheel Speed: | 10 to 350 rpm |
| 9″ rubber wheel as per ASTM G65 | |
| Wheel Types: | 6.65″ steel wheel as per ASTM B611 |
| 7″ rubber wheel as per ASTM G105 | |
| Load: | 20 to 350 N |
| Motor Type: | a.c. motor with frequency inverter drive |
| Specimen Size: | 25 mm x 58 mm |
| Specimen Thickness: | 6 mm to 16 mm |
| Test Types: | ASTM G 65. ASTM G 105. ASTM B 611 |
| Services | |
| Electricity: | 220/240V, single phase, 50 Hz, 1 kW |
| 110/120 V, single phase, 60 Hz, 1 kW |
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com
