I. Product Overview
The Flatbed Ironing Tester is a precision instrument designed to evaluate fabric performance under simulated ironing conditions. It measures heat resistance, crease recovery, and shrinkage resistance, providing critical data for textile quality control and R&D applications.
- Type: Bench-top thermal testing equipment
- Temperature Range: Ambient +20°C to 300°C
- Pressure Control: 0.5-5 kPa adjustable (simulates iron weights)
- Test Area: 300×300mm heated flatbed
- Applications: Apparel, home textiles, industrial fabrics
II. Technical Specifications
| Parameter |
Specifikationer |
| Heating Rate |
10°C/min (programmable) |
| Cooling System |
Forced air cooling (30°C recovery in 5min) |
| Power Supply |
220V/50Hz, 1.5kW |
| Mått |
600×500×1200mm (W×D×H) |
| Vikt |
45kg |
| Temperature Uniformity |
±2°C across test area |
III. Key Features
- Multi-Test Modes:
- Crease Recovery Test: Measures angle retention after 5min pressing
- Shrinkage Test: Evaluates dimensional stability at 180°C
- Heat Setting Test: Simulates industrial ironing conditions
- Digital Control System:
- 7-inch touchscreen interface
- Programmable 100-step test sequences
- Real-time data logging (CSV export)
- Safety Features:
- Overheat protection (auto-shutdown at 310°C)
- Interlock door switch
- Grounding indicator
IV. Compliance Standards
- ISO 3758 (Textile care labeling)
- ASTM D1683 (Fabric wrinkle recovery)
- AATCC 117 (Flammability resistance)
- GB/T 3917.3 (Chinese textile shrinkage standard)
V. Applications
- Quality Control: Batch testing of finished fabrics
- R&D: Developing wrinkle-resistant treatments
- Textile Education: Training on heat treatment effects
- Forensic Analysis: Evaluating garment damage causes
Standard Test Procedure:
- Sample Preparation: Cut 100×100mm specimens
- Positioning: Center sample on heated plate
- Parameter Setup: Select test mode (e.g., 200°C/3kPa/5min)
- Data Acquisition: Record recovery angle/shrinkage rate
- Cleaning: Autoclave decontamination cycle
Safety Precautions:
- Wear heat-resistant gloves during operation
- Use heat-resistant mats under equipment
- Maintain 30cm clearance from flammable materials
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
