DescriptionThe STD-TE 88 Reciprocating Pin on Plate machine is a three station wear and friction te
WhatsApp: +86 13816217984
E-postadress:info@qinsun-lab.com
The STD-TE 88 Reciprocating Pin on Plate machine is a three station wear and friction tester primarily designed for testing polymers and coatings in a production environment. The machine can also perform tests in accordance with ASTM F732.
The machine includes an a.c. variable speed gear-motor with variable throw crank, reciprocating assembly, three load, friction and wear pin carrier assemblies and a control and data acquisition system. Load is applied manually and measured with a force transducer. Friction is measured with a force transducer and wear is sensed by linear potentiometer.
| Normal Load: | 10 to 1.000N |
| Signal Conditioning: | Strain Gauge Amplifier Module |
| Friction Force Range: | 250 N |
| Signal Conditioning: | Strain Gauge Amplifier Module |
| RMS/DC Converter Module | |
| Wear: | Linear Potentiometer |
| Range: | 2 mm |
| Resolution: | 0.5 µm |
| Specimen Holder: | 8 mm and 5.5 mm diameter pins |
| Optional Holders: | 10 mm and 6 mm diameter balls |
| Interface: | USB Serial Link Interface Module |
| Software: | COMPEND 2000 |
| Motor: | a.c. Vector Motor 0.55 kW |
| Contact Configurations: | Pin on Plate |
| Ball on Plate | |
| Temperature Range: | Ambient to 200°C |
| Heating Power: | 800 W |
| Temperature sensor: | k-type thermocouple |
| Maximum Stroke: | 50 mm |
| Maximum Frequency: | 5 Hz |
| Maximum Frequency @ Maximum Stroke: | 2 Hz @ 50 mm |
| Automatically Controlled Parameters | Frequency |
| Provningstid | |
| Manually Controlled Parameters | Belastning |
| Reciprocating Stroke Length | |
| Measured Parameters | Friction |
| Belastning | |
| Temperature | |
| Wear | |
| Frequency | |
| Number of Cycles | |
| Provningstid | |
| Friction Coefficient | |
| Sliding Distance |
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com
