Auto wire abrasive belt drag grinding machine

Tillämpliga standarder:

QC/T730-2005. SAE-J1128-2005. DIN 72551. IS06722. JASO D 618 and other standards

Tillämpning:

Suitable for detecting the drag resistance test of automobile wires.The abrasion resistance tester is to fix the product on the fixture at both ends, and the abrasive belt can test the product under certain load, speed and stroke. Auto Parts Test Equipment

Test sample:

Automobile wires.

Feature:

1.The cabinet is treated with electrostatic baking paint. The whole machine has reasonable design, tight structure, safe and stable operation up to standard.

2.Length can be preset, load can be superimposed, humanized design.

Main parameters:

1. Applicable wire diameter: less than 15mm

2. Sand belt length counting range :0——999999mm

3. Sand belt walking speed :1500mm/min

4. Rounded corner of sand belt support :3.5mm

5. Test voltage :24V

6. Load :20g/50g/100g/200g(2PCS)/500g/900g/1000g

7. Load support weight :65g(0.63N±0.05N)

8. Sand belt and sample Angle :29°

9. Conductive strip spacing :75mm or 150mm

10. Conductive strip width :10mm

11. Power :200VA/220V 50HZ

12. 80#, 150#, 180#, 400# sanding belt is available