- Performance evaluation: Test indicators such as the fatigue strength, stiffness and deformation of
WhatsApp: +86 13816217984
E-postadress:info@qinsun-lab.com
YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, and failure criteria.
ASTM F2077-17 (International): Defines methodologies for evaluating the fatigue strength of intervertebral body fusion devices under shear loading.
ISO 12189-1: Additional compliance for mechanical testing of spinal implant components.
Multi-Angle Shear Control: Dual-axis actuator system provides 0°–45° adjustable shear plane orientation.
Dynamic Load Precision: Electromagnetic servo motor maintains R=0.1 load ratio with ±0.05% accuracy.
5 Million Cycle Endurance: Proven capability to complete YY/T 0959’s 5×10⁶-cycle fatigue test without calibration drift.
Real-Time Deformation Monitoring: 3D digital image correlation (DIC) tracks micro-strains during testing.
Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with 20±2 g/L protein concentration.
Modular Test Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environments.
Electromagnetic Servo Motor: 10 kN axial/shear force capacity with programmable load ratios (R=0.1–10).
Adjustable Shear Plane: Motorized 0°–45° tilt mechanism with laser alignment system.
Dynamic Load Control: 0.1–10 Hz frequency range with programmable waveforms (sine, square, random, custom).
Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.
Safety System: Emergency stop, overload clutches, and laser-based specimen breakage detection.
Parameter | Specifikation |
---|---|
Max. Shear Force | ±10.000 N (100 N resolution) |
Shear Plane Adjustment | 0°–45° (0.1° resolution) |
Frequency Range | 0.1–10 Hz (0.01 Hz increments) |
Load Ratio (R) | 0.1–10 (adjustable) |
Temperaturkontroll | -20°C to +50°C (PT1000 sensors) |
Luftfuktighetskontroll | 10–95% RH (non-condensing) |
Data Acquisition | 100 kHz sampling rate (16-bit resolution) |
Power Requirements | 220V/110V ±10%, 50/60Hz, 2.500W |
Dimensions (W×D×H) | 1.800 × 1.200 × 2.100 mm |
Vikt | 1.050 kg (including environmental chamber) |
Noise Level | <65 dB (A-weighted) |
Spinal Implant Fixture Kit:
Self-centering collet system (8–20 mm implant diameter compatibility)
Adjustable shear blades with diamond-like carbon (DLC) coating
Thermal-Mechanical Chamber:
20L capacity with rapid cooling/heating (15°C/min)
316L stainless steel interior with HEPA filtration
ShearMaster Pro Software:
Automated S-N curve generation and fatigue limit calculation
21 CFR Part 11-compliant audit trail with blockchain timestamping
Remote monitoring via iOS/Android app
Operator Kit:
Calibrated torque wrench set (1–50 Nm)
Specimen alignment gauges (ASTM F2077 compliant)
Calibration Bundle:
NIST-traceable force calibration weights
Angular encoder verification tool
Safety Kit:
Laser safety curtains
Acoustic enclosure with 30 dB noise reduction
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com