Computer-controlled Helmet Impact Tester

Application Scope

This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the impact - resistance performance and penetration - resistance of helmets.

Standard

GB 811 GB 24429

GB/T 38305-2019 GA 44

IS 4151 (India)

DOT FMVSS No. 218 (USA)

ECE R22.05 (Europe)

EN 1078 (Cycling helmets)

IS 2925 (Industrial safety helmets)

Specifikationer

1 System components: consists of a crash test stand and an analysis recorder.

2 Crash test bench: composed of fall guidance device, head type, head type fixed frame, ball joint, anvil, anvil seat, release guidance system and seat base and other components.

3 Impact height: control interface setting, with guidance system, acceleration detection and calibration device (1000 ~ 3000mm can be customized)

4 Base: the optimal solution is made of reinforced concrete, the instrument's steel base is connected to the concrete base, so that its quality is not less than 1600kg.

5 Test and Analysis Instrumentation System: consists of acceleration sensors or impact sensors, amplifiers, and data processing, display and recording, and other components. Part of the composition

Technical Specifications:

Dimensions (L*W*H*H cm): 90*80*450 (according to the order impact height)

Weight (kg): 350

Installation requirements:

1 Power supply: AC 220V 50Hz 500W

2 Environment: 10 ~ 35 ℃

3 Operation: floor, connected to the concrete pedestal