Rupture strength tester
Product introduction Carton blasting machine is an international universal MULLEN （MULLEN） type ins
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
Innehåll
Standard
- IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing
- UL 61730: Safety Standard for Photovoltaic Modules
- CE Certification (Conformité Européenne)
Product Advantages
- Ultra-Wide Pressure Range
- 250–5,600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.
- 0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.
- Precision Engineering
- 5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.
- Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.
- Safety First
- Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5,600 kPa.
- Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.
- User-Centric Design
- 7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.
- Voice-Guided Setup: Step-by-step audio prompts for operators.
- Data Integrity
- Built-In Printer: Generates ISO 17025-compliant test certificates on-site.
- SD Card Logging: Exports pressure-time curves for R&D analysis.
Product Features
- Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.
- Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.
- Self-Calibrating System: Auto-tare and linearity checks before each test.
- Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.
- Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.
Tekniska parametrar
| Parameter | Specifikation |
|---|
| Pressure Range | 250–5,600 kPa (36–812 psi) |
| Resolution | 0.01 kg/cm² (1.42 psi) |
| Holding Pressure | 5 kg/cm² (71 psi) adjustable |
| Air Source | 6 kg/cm² (87 psi) min (customer-provided) |
| Control Accuracy | ±1% FS (full scale) |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Mått | 560mm (W) × 470mm (D) × 550mm (H) |
| Vikt | 60 kg (net) |
Accessories Included
- Testing Kit:
- 1x Specialized Clamping Fixture (for 2–20 mm modules).
- 2x High-Temperature Rubber Membranes (300°C rated).
- 5x Aluminum Foil Calibration Discs.
- Consumables:
- 1x 85% Glycerin Solution Bottle (for hydraulic calibration).
- 10x Disposable Dust Filters.
- Documentation:
- Multilingual Quick-Start Guide (printed + digital).
- Compliance Certificates for IEC/UL Standards.
- Safety Gear:
- 2x Safety Goggles (ANSI Z87.1 rated).
- 1x Emergency Pressure Release Key.
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
