Molten metal tester counts drops until specimen temperature rises 40°C.
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
The instrument is used for determining the behavior of materials exposed to small splashes of molten metal. A welding wire is melted by a burner and drops onto the specimen. The number of molten drops which drop on one point of the vertically fixed specimen is counted until the temperature in the temperature sensor behind the specimen rose by 40°C. The burner is adjusted by a mass-flow meter with manual control valve. The skipping speed of the welding wire can be adjusted as well. The power supply for the controller is provided by an IEC-320 AC power cord set 230 VAC (50/60 Hz).
Tekniska parametrar
Objekt | Parametrar |
Sample geometry | Textiles |
Test standards | DIN EN 348 |
Sensory function | Temperature |
Kraft | 230 VAC / 30 VA Oxygen / Acetylen |
Dimension | 1200 x 1000 x 600 mm (W x D x H) |
Vikt | Ca. 50kg |
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com